Urine is already a liquid. Yet in thousands of commercial washrooms, treated potable water is still added every time a urinal is used simply to move that liquid into the drain.
For decades that arrangement has been normal enough to escape much scrutiny.
The user arrives, a valve or sensor activates, drinking-quality water enters the fixture and the combined flow disappears into the sanitary drainage system.
But when purpose-designed waterless urinals can perform the same basic user function without routine flushing water, the old default deserves a fresh question.
Why are we still doing it?
The short answer
Mostly because flushing urinals are familiar, established and routinely specified.
That does not make them wrong. But familiarity is not the same as technical necessity.
Where a commercial building can use a properly designed waterless urinal, potable flushing water, flush valves, cisterns, sensors and the plumbing required solely for the flush can all be reconsidered.
We rarely ask what the flush is actually doing
A urinal flush performs several familiar functions at once.
It adds hydraulic movement, rinses the fixture and maintains the conventional idea that water is required for sanitation.
But these functions can be separated.
Urine can move by gravity.
Odour can be controlled by a purpose-designed barrier.
The exposed fixture can be cleaned directly.
Once those functions are considered independently, routine flushing becomes one design method rather than the definition of the urinal itself.
The presence of a flush does not prove that flushing water is indispensable. It proves that the building was designed around a flushing urinal.
Potable water has already done a lot before it reaches the urinal
Water delivered through a building's potable supply has been collected, treated, stored and conveyed so it is suitable for human use.
That level of infrastructure makes obvious sense for drinking, food preparation, handwashing and other hygiene functions.
Using the same resource simply to transport urine through a urinal deserves a different level of scrutiny.
The question is especially relevant in a commercial building because the use repeats throughout the day, then continues across years of operation.
The environmental case is cumulative. Waterless technology does not create its benefit through one dramatic event. It removes a small recurring demand every single time the fixture is used.
The flush needs an entire support system
Flushing water does not appear at the fixture by itself.
The urinal can require water pipework and a means of controlling that flow.
Depending on the installation, that may include valves, cisterns, sensors, solenoids, isolators or other components.
All of those parts can be perfectly serviceable technology.
But they exist because the fixture has been designed to flush.
Remove the routine flush and that supporting layer can also be simplified.
Waterless does not mean “just remove the water”
A proper waterless urinal is not an ordinary flushing fixture with the supply disconnected.
It is designed around a different operating architecture.
Urine drains by gravity while a dedicated odour-control system prevents foul air from travelling back through the waste outlet.
Different manufacturers achieve this in different ways through cartridges, membranes, mechanical barriers or sealing fluids.
The fixture and drainage are then maintained according to the requirements of that technology.
Waterless sanitation works because another engineering method replaces the function of the flush — not because hygiene and odour control have been abandoned.
uridan was designed around this question from the beginning
uridan is not a conventional urinal adapted later to use less water.
Its technology was developed around waterless operation.
The uridan siphon and uriLOCK® blocking fluid create the odour barrier while gravity carries urine into the drainage system.
The fixture therefore does not require a conventional water or electrical connection to perform its normal urinal function.
WCTNZ® supports the technology in New Zealand with specification guidance, product supply, installation information, maintenance procedures and the ongoing uridan care range.
Explore uridan in New Zealand »
“But don't waterless urinals smell?”
They should not be accepted as smelly fixtures.
Odour is a system-performance question.
A functioning waterless installation depends on the odour barrier, drainage condition, fixture cleanliness and maintenance regime all doing their jobs.
If one of those is neglected, odour can develop — just as conventional washrooms can develop odour through dry traps, contaminated surfaces, blocked drainage or inadequate cleaning.
The correct response is diagnosis, not assumption.
Waterless is not maintenance-free. uridan relies on correct cleaning, a maintained uriLOCK® barrier and periodic system care. The absence of flushing water does not remove operational responsibility.
The cleaner needs to know what has changed
One of the easiest ways to undermine unfamiliar washroom technology is to specify it beautifully and hand it over badly.
Cleaning contractors need to know which products to use, what not to pour into the outlet and how the odour-control system is maintained.
Facilities staff need a simple route for replenishing consumables and responding to abnormal performance.
This is why WCTNZ® treats long-term care as part of the product system rather than an optional extra.
See uridan Maintenance Instructions »
A sustainability measure does not need to look like a compromise
Environmental fixtures have sometimes been treated as though their appearance must announce sacrifice.
That is not the uridan approach.
The product range is deliberately architectural, with ceramic, GRP, compact, high-privacy, sculptural and high-capacity formats suited to different interiors.
This matters because sustainable technology is more likely to remain part of the building when designers, users and facility teams see it as good design rather than as something tolerated for environmental reasons.
Being water-rich is not the same as having water to waste
New Zealand's relationship with water can make conservation feel less urgent than it might in an obviously dry country.
But potable water still requires infrastructure.
It must be collected, treated and distributed. Once it has been used, the resulting wastewater must be conveyed and treated again.
Avoiding unnecessary demand remains useful even where immediate scarcity is not the only driver.
Sensible resource use is strongest when it is chosen before scarcity forces it.
Should every existing flushing urinal be ripped out tomorrow?
No.
A functioning fixture has embodied value, and premature replacement does not automatically create the strongest environmental or commercial result.
But new buildings, planned refurbishments and end-of-life fixture replacements are exactly when the assumption should be challenged.
If the washroom is already being redesigned, the decision should be active rather than automatic.
- What is the expected urinal traffic?
- How much flush water will the conventional option use over its service life?
- What water-supply hardware will it require?
- What maintenance pathway will each option create?
- What consumables will the waterless system require?
- Is the existing or proposed drainage suitable?
- Who will support the installation after handover?
Perhaps the unusual fixture is the one still using drinking water
Waterless urinals have spent years being described as the alternative.
That description makes sense only while the flush remains the unquestioned reference point.
Once the same basic urinal function can be delivered without routine flush water, the comparison begins to reverse.
The future question may not be “Why would this building install a waterless urinal?” It may be “Why did this building decide that flushing potable water was still necessary?”
That is the market conversation WCTNZ® believes is worth having in New Zealand.
Commercial waterless urinal FAQs
Why do conventional urinals use drinking water?
They are typically connected to the building's potable water supply unless another flushing source has specifically been provided. The water rinses the fixture and provides hydraulic movement through the conventional arrangement.
Can a urinal work without flushing water?
Yes. Purpose-designed waterless urinals use gravity drainage and a dedicated odour-control technology instead of a conventional flush cycle.
Do uridan waterless urinals need water or electricity?
uridan's waterless operating system does not require a conventional water or electrical connection for normal urinal operation.
Are waterless urinals suitable for high-use commercial buildings?
They can be particularly attractive in high-use buildings because avoided flushing demand repeats with every use. Fixture selection, drainage and the maintenance regime still need to suit the actual site.
Are waterless urinals maintenance-free?
No. They still require cleaning and correct maintenance of the odour-control and drainage system. The maintenance pathway is different from a flushing urinal rather than absent.
Designing or refurbishing a commercial washroom?
WCTNZ® can help assess where uridan waterless urinals fit, including fixture selection, traffic level, drainage, installation considerations and the long-term facilities-management pathway.
